| Product SKU |
PG133 SKU 250 |
| Total board power |
300 W default
300 W maximum
100 W minimum |
| Thermal Solution |
Passive |
| Mechanical Form Factor |
Full-height, full-length (FHFL) 10.5”, dual-slot |
| GPU SKU |
AD102-895/895A |
| PCI Device IDs |
Device ID: 0x26B5
Vendor ID: 0x10DE
Sub-Vendor ID: 0x10DE
Sub-System ID: 0x169D |
| GPU Clocks |
Base: 735 MHz
Boost: 2,490 MHz |
| Performance States |
P0 |
| VBIOS |
EEPROM size: 8 Mbit
UEFI: Supported |
| PCI Express Interface |
PCI Express Gen4 x16
Lane and polarity reversal supported |
| Multi-Instance GPU (MIG) |
Not Supported |
| NVIDIA® NVLink® |
Not Supported |
| Zero Power |
Not Supported |
| Connectors |
One PCIe 16-pin auxiliary power connector
Four DisplayPort connectors |
| Weight |
Board: 1,051 grams (excluding bracket, and extenders)
Bracket with screws: 20 grams
Enhanced straight extender: 35 grams
Long offset extender: 48 grams
Straight extender: 32 grams |
| Memory Clock |
9,001 MHz |
| Memory Type |
GDDR6 |
| Memory Size |
48GB |
| Memory Bus Width |
384 Bits |
| Peak Memory Bandwidth |
864 GB/s |
| SR-IOV support |
Supported — 32 VF (virtual functions) |
| BAR address (physical functions) |
BAR0: 16 MiB
BAR1: 64 GiB (Display Off mode; default)
BAR1: 8 GiB (Display On, 8 GB BAR1 mode)
BAR1: 256 MiB (Display On, 256 MB BAR1 mode)
BAR3: 32 MiB |
| BAR address (virtual functions) |
Display Off Mode (default):
• BAR0: 8 MiB (32 VF × 256 KiB)
• BAR1: 64 GiB, 64-bit (32 VF × 2 GiB)
• BAR3: 1 GiB, 64-bit (32 VF × 32 MiB)
Display On Modes:
VF BAR sizes are not applicable to Display On modes |
| Message signaled interrupts |
MSI-X: Supported
MSI: Not supported |
| ARI Forwarding |
Supported |
| Driver Support |
Linux: R525 or later
Windows: R525 or later |
| Secure Bot |
Supported (See “Root of Trust” section) |
| CEC firmware |
Not Supported |
| NVIDIA® CUDA® support |
CUDA 12.0 or later |
| Virtual GPU software support |
Supports vGPU 15.1 or later: NVIDIA Virtual Compute Server
Edition |
| Operating Modes |
Display Off mode (default)
Display On, 8 GiB BAR1 mode
Display On, 256 MiB BAR1 mode |
| PCI Class Code |
0x03 – Display controller |
| PCI subclass code |
0x02 – 3D controller (Display Off)
0x00 – VGA controller (Display On) |
| Primary boot device capability |
Supported in Display On modes |
| ECC Support |
Enabled (default); can be disabled by software |
| SMBus (8-bit address) |
0x9E (write), 0x9F (read) |
| IPMI FRU EEPROM I2C address |
0x50 (7-bit), 0xA0 (8-bit) |
| Reserved I2C addresses |
0xAA, 0xAC |
| SMBus direct access |
Suppported |
| SMBPBI |
Suppported |
| Warranty |
|
| Note** |
**Prices, Specifications & Features are subject to change without notice |
Reviews
There are no reviews yet.